XT - XT6 - Alcyone - Vortex Windscreen Banners

These are pre cut and printed XT/Alcyone/Vortex Windscreen banners, they are the perfect fit for your XT or XT6, and are pre-cut to fit perfectly to the wide and sleek windscreen.

These are printed on air-release polymeric vinyl with latex inks so can last up to 3 years outside with minimal wear or deterioration. The Decal versions are either 1 or 2 colour vinyls and are to be applied with water, and are only the size and shape of the grey outline.

Banners are not laminated and have a nice matte finish, these are very flexible so must be installed in shade to prevent stretching in sunlight.

We have RS TURBO, SS TURBO and GT LEGACY designs also on the site, as well as many many others, please contact us if you are after a particular design. Use the custom version for a banner with your club or logo, artwork is included in the banner price (within reason, contact to discuss) - Further banners will be at the usual prices, only the first will attract the custom price.

APPLICATION

Best method for sticker banners is a hinge with masking tape applied straight down the center, lift one side and peel toward the middle, and cut off that half of the backing, starting from the center outwards, apply the sticker down without shifting the hinge tape, and altering it's position, then remove the hinge masking tape and lift to do the other side, removing the backing from the center outward, Alternatively they can be done from one side and carefully ran across with a rag or card, but may lead to more stretching or distortion. DO NOT USE WATER WITH THE PRINTED BANNERS.

Decal versions should be applied with copious water and should be carefully carded and moved into position and allowed to dry before removing the application paper

Material:
Polymeric vinyl

Ink:
Latex

Large Size is 1100mm x 210mm